Yamaha KT100SEC - STARTING PROCEDURES; STARTING THE ENGINE; COLD ENGINE STARTING; ENGINE STOPPING

1-2
GEN
INFO
STARTING
1. Starttheenginebypushingthestartswitch.
Iftheenginefailstostartbypushingthestart
switch,releasetheswitch,wait30seconds,
andthentryagain.
3.Stoptheenginebypushingthestopswitch.
Continuepushingtheenginestopbuttontill
theenginecomestoastop.
2.Whentheengineiscold,covertheairbox
entrance lightly with the hand to choke off
theairflow.
STARTING
●
Donotcranktheenginemorethan4seconds
onanyoneattempt.Fortheprotectionofthe
starter motor and the prevention of the
battery'soverdischarge,allow30secondsor
moreforenginerestart.
●
Iftheengineisstartedincontinuedsuccession,
the battery may run out or the starter motor
maybedamaged.
STARTINGTHEENGINE
CAUTION: