CHASSIS SPECIFICATIONS
2-5
CHASSIS SPECIFICATIONS
Chassis
Frame type Underbone
Caster angle 26.4 °
Trail 91 mm (3.6 in)
Front wheel
Wheel type Cast wheel
Rim size J12 1.85
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Rear wheel
Wheel type Cast wheel
Rim size J10 2.15
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Front tire
Type Tubeless
Size 90/90–12
Manufacturer/model MAXXIS/M6307
Manufacturer/model TVS/CONTA775F
Rear tire
Type Tubeless
Size 110/90–10
Manufacturer/model MAXXIS/M6220
Manufacturer/model TVS/CONTA775R
Tire air pressure (measured on cold tires)
1 person
Front 150 kPa (1.50 kgf/cm², 22 psi, 1.50 bar)
Rear 200 kPa (2.00 kgf/cm², 29 psi, 2.00 bar)
2 persons
Front 150 kPa (1.50 kgf/cm², 22 psi, 1.50 bar)
Rear 200 kPa (2.00 kgf/cm², 29 psi, 2.00 bar)
Brake
Type Unified brake system
Operation Activated by rear brake
Front brake (Drum)
Front brake lever free play 10.0–20.0 mm (0.39–0.79 in)
Brake drum inside diameter limit 131.0 mm (5.16 in)
Lining thickness limit 2.0 mm (0.08 in)
Brake cable UBS free play 0.1–1 mm
B7JF8197E1.book Page 5 Tuesday, June 29, 2021 2:28 PM
To Next Page
Loading...
Need help?
General
