Trouble Recovery
105
(1) Stop the engine.
(2) Remove the top cowling.
(3) Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
[ECM01951]
(4) Remove the cover.
(5) Remove the hose holder, and then re-
move the fuel filter from its holder.
1. Water detection switch coupler
1. Cover
1. Holder
2. Fuel filter
U6EK38E0.book Page 105 Wednesday, December 1, 2021 10:35 AM
To Next Page
