Instruments and indicators
45
Press the confirm button to change to the
normal display. The engine alert icon will start
to blink.
ECM00093
Do not continue to operate the engine if an
alert device has activated. Consult your
Yamaha dealer if the problem cannot be
located and corrected.
The engine alert icon will appear according to
the kind of abnormality. The symbols and
their explanations are described below.
Overheat alert “ ”
If the engine temperature rises too high
while cruising, this alert will be activated.
Stop the engine immediately. Check the
cooling water inlet for clogging, and clear it
if it is blocked.
ECM01594
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
Low oil pressure alert “ ”
If the engine oil pressure drops too low, this
alert will be activated. Stop the engine im-
mediately. Check the engine oil level and
replenish oil if necessary. If the alert device
has activated while the appropriate engine
oil level is maintained, consult your
Yamaha dealer.
ECM01602
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
Water in Fuel Alert “ ”
If water has accumulated in the water sep-
arator (fuel filter) while cruising, this alert
will be activated. Stop the engine immedi-
ately and see page 102 of this manual to
drain the water from the fuel filter. Consult
a Yamaha dealer.
ECM00911
Gasoline mixed with water could cause
damage to the engine.
Low battery voltage alert “ ”
If the battery voltage drops, this alert will be
activated. If the low battery voltage alert
device has activated, return to port and
consult a Yamaha dealer immediately. To
charge the battery, consult your Yamaha
dealer.
1. Pop-up window
2. Confirm button
1. Engine alert icon
U6EK38E0.book Page 45 Wednesday, December 1, 2021 10:35 AM
To Next Page
