To Next PageTo Next Page
Need help?Do you have a question about the Yamaha M7CL StageMix V5 and is the answer not in the manual?
General| Category | Music Mixer |
|---|---|
| Manufacturer | Yamaha |
| Model | M7CL StageMix V5 |
| Software Version | V5 |
| Platform | iOS |
| Connection | Wi-Fi |
| Bit Depth | 24-bit |
| EQ | 4-band parametric EQ |
| Effects | Built-in effects |
| Control | iPad/tablet control via StageMix app |
| Compatible Hardware | Yamaha M7CL mixing console |
| Function | Remote control |
| Sample Rate | 48 kHz |
Connects the Wi-Fi access point to the M7CL console using a CAT5 cable.
Configures the iPad's Wi-Fi connection using DHCP or a Static IP address.
Guides the user through launching and setting up the StageMix application.
Selects banks of channels to be viewed and controlled within the channel strips.
Explains how channel names and colors appear and how to edit them.
Details the functionality and adjustment of faders in the StageMix application.
Controls the on/off status of a channel and its visual indication.
Manages the Cue functions for each channel and their operational modes.
Accesses channels from the master section, including Stereo Master and Mono Master.
Controls the gain for each input channel using faders in StageMix.
Allows access to sends for Mix and Matrix Busses, controlling send levels via faders.
Accesses and controls the console's 8 DCAs (Directly Controlled Amplifiers).
Explains the dedicated Parametric EQ (PEQ) and available Graphic EQs (GEQs).
Details how to edit parametric EQ settings, including frequency, gain, and Q.
Covers the editing of Graphic EQ (GEQ) parameters for the console.
Describes how to adjust Pan position for channels sent to Stereo Busses.
Explains the status and parameters of the channel dynamics processors.
Provides detailed editing capabilities for the channel dynamics processors.
Navigates through banks of output ports in the OUTPORTS mode.
Identifies the physical output port names displayed on the channel strips.
Controls the On/Off status of the delay for each output port.
Shows the current delay time value for each output port.
Adjusts the phase setting for each output port channel.
Adjusts the gain for each output port channel.
Allows detailed editing of delay time values for output ports.
Functions as master switches for the console's Mute Groups.
Allows tapping BPM values into effects with BPM parameters.
Controls all aspects of the Oscillator function in the M7CL console.
Displays the current scene number, title, and comment.
Allows instant recall of previous and next scenes relative to the current scene.
Displays the list of scenes available for recall from the console.
Defines the range of scenes to be transmitted from the console to StageMix.
Shows details of a selected scene, including title, comment, and status.
Stores the current console parameter settings to a selected scene memory.
Cancels the most recent scene store operation.
Recalls a selected scene memory to the console.
Cancels the most recent scene recall operation.
A safety function to prevent accidental fader movements.
Configures whether one or multiple channels can be cued simultaneously.
Controls whether the EQ graph is filled in or shown as an outline.
Enables buttons for instant recall of the next or previous scene.
Displays send levels or input levels in the Meter Bridge.
Allows phantom power to be turned On/Off from StageMix.
Allows EQ gains to be set to 0dB by double-tapping the EQ band.
Displays dB fader level markings in the main Mixer Screen.
Allows DCA faders to be set to 0dB by double-tapping.
The selected channel in StageMix EQ screens follows the console selection.
The console's selected channel follows the StageMix EQ screen selection.
Selects the signal path point for input channel metering.
Selects the signal path point for output channel metering.
Shows Key Input signal level or input signal level for dynamics meters.
Selects the RTA display mode (Freeze, All Peaks, High Peak).
Adjusts input gain or attenuation for the RTA signal.
Addresses issues where the iPad is not connected to a Wi-Fi access point.
Troubleshoots errors when StageMix cannot connect to the console.
Explains what happens when StageMix loses its connection to the console.
Guides on configuring the DHCP server on a Wireless Access Point or Router.
Addresses issues with iOS 6+ attempting to access the internet instead of StageMix.
Troubleshoots why a Graphic EQ assignment might not affect the sound.
Provides solutions for issues with moving multiple faders simultaneously.
Directs users to the StageMix Facebook page for information exchange.
