Yamaha MFC10 - Page 16

15
Normal Mode
• Section Control (F0) [STATUS=F0]
* When c41 or c42 is selected, the device number must be set in BANK MSB/MAX.
F0
•Continue (Fb) [STATUS=Fb]
Other parameters cannot be set.
Fb
•Stop (FC) [STATUS=FC]
Other parameters cannot be set.
FC
DATA/CTRL c01-c42 (Section Number)
BANK MSB/MAX 01-16, - - - (Device Number)
c17 Fill In AA1
c18 Fill In AA2
c19 Fill In AA3
c20 Fill In AA4
c21 Fill In AA5
c22 Fill In AA6
c23 Fill In AA7
c24 Fill In AA8
c25 Fill In AB1
c26 Fill In AB2
c27 Fill In AB3
c28 Fill In AB4
c29 Fill In AB5
c30 Fill In AB6
c31 Fill In AB7
c32 Fill In AB8
c33 Ending 1
c34 Ending 2
c35 Ending 3
c36 Ending 4
c37 Ending 5
c38 Ending 6
c39 Ending 7
c40 Ending 8
c41 Reset Start
c42 Stop & Rewind
c01 Intro 1
c02 Intro 2
c03 Intro 3
c04 Intro 4
c05 Intro 5
c06 Intro 6
c07 Intro 7
c08 Intro 8
c09 Main 1
c10 Main 2
c11 Main 3
c12 Main 4
c13 Main 5
c14 Main 6
c15 Main 7
c16 Main 8
Data for section types that can be transmitted are listed below.
• Tempo Control (Ft) [STATUS=Ft]
Ft
DATA/CTRL 030~250 (Tempo Value)
The tempo of external devices can be controlled within a range of 30-250 beats per minute.