For your safety – pre-operation checks
5-2
5
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip
free play and lubricate cable and grip housing.
7-15,
7-25
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-25
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-23,
7-24
Wheels and tires
•Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-16,
7-18
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
7-26
Brake and clutch le-
vers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-26
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-27
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
—
Instruments, lights,
signals and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer
check vehicle.
4-22
ITEM CHECKS PAGE
UB5W10E0.book Page 2 Friday, March 27, 2020 12:34 PM
To Next Page
Loading...
