Yamaha MT03M User Manual

Periodic maintenance and adjustment
7-34
7
5. Insert a new bulb into the socket.
6. Install the socket (together with
the bulb) by pushing it in.
7. Install the rear fender lower panel
by installing the bolts and screws.
8. Install the mudguard by installing
the quick fasteners.
EAU67131
Supporting the motorcycle
Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
up right.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
1. License plate light bulb
2. License plate light bulb socket
2
1
1. Maintenance stand (example)
1
UB5W10E0.book Page 34 Friday, March 27, 2020 12:34 PM

Yamaha MT03M Specifications

General

Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valve
Displacement	321 cc
Bore x Stroke	68.0 mm x 44.1 mm
Compression Ratio	11.2:1
Fuel System	Fuel injection
Transmission	6-speed
Seat Height	780 mm
Final Drive	Chain
Length	2, 090 mm
Wheelbase	1, 380 mm
Maximum Power	30.9 kW (42 hp) @ 10, 750 rpm
Maximum Torque	29.6 Nm @ 9, 000 rpm
Front Suspension	Telescopic fork
Rear Suspension	Swingarm
Front Brake	298 mm disc
Rear Brake	220 mm disc
Fuel Tank Capacity	14 L
Front Tire	110/70-17
Rear Tire	140/70-17
Weight	168 kg (with oil and full fuel tank)