Yamaha PSR-E343 - Backup and Initialization; Backup Parameters; Initialization Procedures; Backup Clear Function

32
PSR-E343/PSR-E344/YPT-340
■
BACKUP
The following settings are always backed up, and are maintained even when the power is turned off.
If you want to initialize the settings, use the Initialize operation “Initialization” as explained below.
In addition to the Backup data above, all the Style data (including data that have not been loaded) and all the Song data will be
maintained even if you turn off the power.
■
INITIALIZATION
This function erases all backup data in the instrument’s fl ash memory and restores the initial default settings. The following initialization
procedures are provided.
• Backup Clear
To clear data backed up to the internal fl ash memory turn the power on by pressing the [ ] (Standby/On) switch while holding the
highest white key on the keyboard. The backed up data will be erased and the default values restored.
Backup Clear does not delete the fi les transferred from the computer. If you want to delete the fi les, see “Flash Clear” below.
• Flash Clear
To clear song and style fi les that have been transferred to the internal fl ash memory from a computer, turn the power on by pressing
the [
] (Standby/On) switch while simultaneously holding the highest white key on the keyboard and the three highest black keys.
WhenyouFlashClear,SongdataandStyledatayouhavepurchasedanddownloadedwillalsobe
cleared.Makesuretosaveyourimportantdatabytransferringtoacomputer.
Backup parameters
• User Songs
• Style Number 137
• Registration Memory
• Passing status of Song and Step
• FUNCTION Settings: Tuning, Split Point, Touch Sensitivity, Style Volume, Song
Volume, Metronome Volume, Your Tempo, Demo Group,
Demo Play Mode, Demo Cancel, Master EQ type, Panel
Sustain, Auto Power Off, Battery Type