PSR-S970/S770 Reference Manual 27
2
Styles
The instrument has a variety of settings for Style playback which can be accessed in the display below.
1 Call up the operation display.
[FUNCTION] TA B [E] MENU 1 [G] STYLE SETTING
2 Use the [B]/[C] and [1 ]–[8 ] buttons for each setting.
Style Playback Related Settings
[B] OTS LINK
TIMING
This applies to the OTS Link function. This parameter determines the tim-
ing in which the One Touch Settings change with the MAIN VARIATION
[A]–[D] change. (The [OTS LINK] button must be on.)
REAL TIME: One Touch Setting is immediately called up when you
press a MAIN VARIATION button.
NEXT BAR: One Touch Setting is called up at the next measure, after
you press a MAIN VARIATION button.
[C] STOP ACMP When [ACMP] is turned on and [SYNC START] is off, you can play
chords in the chord section of the keyboard with the Style stopped, and
still hear the accompaniment chord. In this condition—called “Stop
Accompaniment”—any valid chord fingerings are recognized and the
chord root/type are shown in the display. Here, you can determine whether
the chord played in the chord section will sound or not in the Stop Accom-
paniment status.
OFF: The chord played in the chord section will not sound.
STYLE: The chord played in the chord section will sound via the Voices
for the Pad channel and the Bass channel of the selected Style.
FIXED: The chord played in the chord section will sound via the speci-
fied Voice, regardless of the selected Style.
NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this is set to
“STYLE.”
NOTE When you record a Song, the chord detected by playing the Stop Accompaniment can be recorded
regardless of the setting here. Please note that both the sounding Voice and chord data is recorded
when set to “STYLE,” and only the chord data is recorded when set to “OFF” or “FIXED.”
To Next Page
Loading...
Need help?
General
