Yamaha R-N301 User Manual (English)

Questions and Answers:

N
Nicole BushAug 27, 2025
How to fix Yamaha Receiver remote control that does not work?
- S
  Stephanie CastroAug 27, 2025
  If your Yamaha Receiver's remote control isn't working, make sure you're within 6 meters (20 feet) and within a 30-degree angle of the front panel. Check for direct sunlight or strong lighting affecting the unit's remote sensor and reposition the unit if necessary. Replace the batteries in the remote. Also, ensure you've pressed the input selection key that corresponds to the component you're trying to control before pressing other keys.
J
James JeffersonAug 26, 2025
What to do if my Yamaha Receiver sound suddenly goes off?
- A
  Allison WalkerAug 26, 2025
  If the sound from your Yamaha Receiver suddenly cuts out, it could be due to a few reasons. The protection circuitry might have been activated because of a short circuit, so ensure the speaker impedance matches your speakers. The unit may have become too hot, so check that the openings on the top panel are not blocked. Also, the auto power standby function may have turned the unit off; change the auto power standby setting in the Option menu to a longer duration or disable it.
D
Dana HuntAug 25, 2025
Why is there no sound from my Yamaha R-N301 Receiver?
- P
  Phillip ThompsonAug 26, 2025
  If you're not getting any sound from your Yamaha Receiver, check these things: Ensure all input and output cables are correctly connected, and replace them if they are defective. Select the correct input source using the INPUT selector. Verify that the SPEAKERS A/B switches are properly set. Secure all speaker connections. Make sure the receiver is not muted. Check that the Max or Initial volume isn't set too low and increase it. Confirm that the connected component is turned on and playing. If using a digital audio input (COAXIAL/OPTICAL), ensure the device's audio output is set to PCM.
X
xflemingAug 25, 2025
Why is there no sound coming from my Yamaha R-N301 Receiver?
- J
  Jeremy EspinozaAug 25, 2025
  If you're not getting any sound from your Yamaha Receiver, here are a few things to check: * Make sure your input and output cables are connected properly. * Select the correct input source using the INPUT selector on the front panel or the remote control. * Ensure the SPEAKERS A/B switches are turned on as needed. * Check that your speaker connections are secure. * Verify that the mute function is turned off. * Make sure the Max volume or Initial volume setting isn't set too low. * Ensure the connected component is turned on and playing. * If using a digital audio input (COAXIAL/OPTICAL), confirm the connected device's audio output is set to PCM.

Yamaha R-N301 Specifications

General

Receiver type	stereo
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.2 %
Power output per channel (1KHz@8 Ohm)	140 W
Power output per channel (20-20KHz@8 Ohm)	100 W
HDMI in	0
Digital audio optical in	1
Speakers connectivity type	-
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Video formats supported	MPEG4
Wi-Fi	No
Ethernet LAN	Yes
Supported radio bands	AM, FM
Preset stations quantity	40
Audio input	6
Product color	Silver
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W