Why can't my Yamaha Receiver connect to the Internet via a wireless router?
If your Yamaha Receiver cannot connect to the Internet via a wireless router, consider the following: * Ensure the wireless router (access point) is turned on. * Verify that the unit and the wireless router (access point) are not too far apart. Place them closer to each other. * Make sure there are no obstacles between the unit and the wireless router (access point).
Why does the sound on my Yamaha R-N402 suddenly go off?
The sound on your Yamaha Receiver might suddenly go off due to these reasons: * The protection circuitry may have been activated because of a short circuit. Set the speaker impedance to match your speakers. * The unit may have become too hot. Ensure the openings on the top panel are not blocked. * The auto power standby function may have turned the unit off. Change the auto power standby setting (“AutoPowerStby” in the “SETUP” menu) to turn off.
General| Receiver type | - |
|---|---|
| Audio output channels | 2.0 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.2 % |
| Dynamic power per channel (4 Ohm) | 165 W |
| Dynamic power per channel (8 Ohm) | 125 W |
| Power output per channel (20-20KHz@8 Ohm) | 100 W |
| Audio (L/R) in | 6 |
| Digital audio optical in | 1 |
| Speakers connectivity type | Clamp terminals |
| Ethernet LAN | Yes |
| Supported radio bands | DAB+, FM |
| Internet radio services supported | Napster, Pandora, Rhapsody, Spotify, vTuner |
| Optical drive included | No |
| Product color | Black |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.1 W |
| Audio formats supported | AAC, AIFF, DSD, FLAC, WAV, WMA |
| Video formats supported | MPEG4 |
Weight and Dimensions| Depth | 340 mm |
|---|---|
| Width | 435 mm |
| Height | 141 mm |
| Weight | 7300 g |
Lists the various audio sources compatible with the unit.
Explains the symbols and indicators shown on the unit's front display.
Step-by-step instructions for connecting speakers to the unit.
Easy wireless setup using the WPS button on the router.
Setting the unit to automatically enter standby mode after a set time.
Step-by-step guide to manually save radio stations as presets.
Managing preset radio stations for DAB reception.
Initial process to pair a Bluetooth device with the unit for audio streaming.
Browsing and playing audio from online radio stations.
Operating and playing music files from connected USB storage devices.
Adjusting network connection type, IP address, and other network parameters.
Configuring Bluetooth connectivity, standby, and audio reception.
Resetting the unit's settings to their original factory defaults.
Steps to update the unit's internal software for improvements or new features.
Solutions for problems related to the unit not powering on or producing sound.
Diagnosing and resolving issues with FM radio signal reception and tuning.
Troubleshooting steps for DAB radio tuning and signal reception issues.
Resolving problems with establishing Bluetooth connections or audio playback.
To Next Page
