En 103
❑ Short Message
Selects whether to display short messages on the TV screen when this unit is operated
(input selection, volume adjustment, etc).
Settings
❑ Wall Paper
Selects a wall paper displayed on the TV.
Settings
■ Trigger Output
Sets the TRIGGER OUT jack to function synchronized with power status of each zone or
input switching.
❑ Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Settings
❑ Target Zone
Specifies the zone with which the TRIGGER OUT jack functions synchronized.
Settings
❑ Target Source
Specifies the output level of the electronic signal transmitted with each input switching
when “Trigger Mode” is set to “Source”.
Choices
HDMI1~7, AV1~6, V-AUX, AUDIO1~2, TUNER, Sirius Satellite Radio, (network sources), USB,
DOCK
Settings
❑ Manual
Switches the output level for electronic signal transmission manually when “Trigger
Mode” is set to “Manual”. This setting can also be used to confirm proper function of
the external component connected via the TRIGGER OUT jack.
Choices
■ Memory Guard
Prevents accidental changes to the settings.
Settings
On (default) Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
Picture1, Picture2, Picture3
Displays the selected image on the TV screen when there
is no video signal.
Gray
Displays a gray background on the TV screen when there
is no video signal.
Power (default)
The TRIGGER OUT jack functions synchronized with the power status of the zone
specified with “Target Zone.”
Source
The TRIGGER OUT jack functions synchronized with the input switching in
the zone specified with “Target Zone.”
Electronic signal is transmitted according to the setting made in “Target
Source.”
Manual
Select this to manually switch the output level for electronic signal transmission with
“Manual.”
Main
When “Trigger Mode” is set to “Power,” electronic signal transmission is
synchronized with power status of the main zone.
When “Trigger Mode” is set to “Source,” electronic signal transmission is
synchronized with input switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power,” electronic signal transmission is
synchronized with power status of Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission is
synchronized with input switching in Zone2.
All (default)
When “Trigger Mode” is set to “Power,” electronic signal transmission is
synchronized with power status of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission is
synchronized with input switching in the main zone or Zone2.
Low
Stops the electronic signal transmission when you switch to the input source
specified in this option.
High (default)
Transmits the electronic signal when you switch to the input source
specified in this option.
Low Stops the electronic signal transmission.
High (default) Transmits the electronic signal.
Off (default) Does not protect the settings.
On Protects the settings until “Off” is selected.
To Next Page
Loading...
Need help?
General
