Enabling/disabling the HDMI Control function
Enabling the HDMI Control function allows the sound bar to be controlled using the TV’s remote control.
Default setting: Enabled
1 Turn off the sound bar.
2 Hold down TV for at least five seconds.
The HDMI Control function switches from enabled to disabled, or from disabled to enabled.
The indicator shows the setting status for a few seconds as follows, and the sound bar turns
on.
Glows: when enabled
Off: when disabled
NOTE
(
When connected to a TV’s ARC-compatible HDMI input jack, enable the HDMI Control function.
(
When you want to reduce standby power consumption, disable the HDMI Control function. In this case, use the included remote
control to control the sound bar.
Related links
(
“Connecting to a TV compatible with ARC”(p.23)
(
“The sound bar cannot be controlled using the TV’s remote control”(p.62)
(
“How to minimize standby power consumption”(p.72)
48
CHANGING AND INITIALIZING THE SETTINGS > Enabling/disabling the HDMI Control function
To Next Page
Loading...
