Audio playback
No sound
(
The input source you are attempting to play back from is not selected.
Select the correct input source.
(
“Basic control during playback”(p.31)
(
The mute function is active.
Cancel the mute function.
(
“Basic control during playback”(p.31)
(
The volume is too low.
Turn up the volume.
(
“Basic control during playback”(p.31)
(
The power cord of the sound bar is not connected securely.
Make sure that the power cord of the sound bar is properly connected to an AC wall outlet.
(
A signal that the sound bar cannot play is being input.
Change the digital audio output setting on the TV or AV device to a type of audio signal supported by the
sound bar.
(
“Supported digital audio signal formats”(p.81)
(
The HDMI Control function is disabled.
When the sound bar is connected to a TV that supports ARC (Audio Return Channel) using an HDMI cable,
enable the HDMI Control function.
(
“Connecting to a TV compatible with ARC”(p.23)
(
“Enabling/disabling the HDMI Control function”(p.48)
(
The audio output destination of a TV using HDMI Control function is the TV’s built-in speakers.
In the TV’s HDMI settings, set the audio output destination to an option other than the TV’s built-in
speakers.
63
TROUBLESHOOTING > Audio playback
To Next Page
Loading...
