How to fix Yamaha TSX-120 when cannot tune into any DAB stations?
If you cannot tune into any DAB stations on your Yamaha Stereo System, it may be because the initial scan operations were not performed. Perform the initial scan operations. It could also be that there is no DAB coverage in your area. Change the height, direction, or placement of the indoor DAB/FM antenna.
Why has the clock setting been cleared on my Yamaha Stereo System?
If your Yamaha Stereo System's clock setting has been cleared, it may be because the unit was left unplugged for more than one week. Plug the power cable into the wall outlet firmly, and set the clock again.
What does 'USB Over Current' mean on Yamaha TSX-120?
If your Yamaha Stereo System displays “USB Over Current,” an incompatible USB device is likely connected. Turn off the system and reconnect the USB device. If the message reappears, the USB device is not compatible with the unit.
Why isn't playback information displayed on my Yamaha TSX-120?
If the playback information is not displayed on the front panel display of your Yamaha Stereo System, the iPod you set is not compatible with the playback information display. Only iPod touch, iPod classic, iPod 5th generation or later, and iPod nano are compatible with the function.
Why can't I operate my iPod from my Yamaha Stereo System?
If you cannot operate from the iPod when it's connected to your Yamaha Stereo System, LIST DISP may be set to F.PANEL. Set LIST DISP to iPod from the FUNCTION menu.
Why does my Yamaha TSX-120 produce noises with digital equipment?
If your Yamaha Stereo System is producing noises when digital or high-frequency equipment is used, the unit may be placed too close to that equipment. Try placing the unit farther away from the digital or high-frequency equipment.
What does “Unknown iPod” mean on my Yamaha TSX-120 Stereo System display?
If your Yamaha Stereo System displays “Unknown iPod” after you set the iPod, it means that the iPod you are using is not supported by the unit. Only iPod touch, iPod (Click Wheel, including iPod classic), iPod nano, and iPod mini models are supported.
How to reset clock on Yamaha TSX-120 Stereo System?
If your Yamaha Stereo System's clock setting has been cleared, it's likely because the unit was left unplugged for more than a week. Plug the power cable firmly back into the wall outlet and set the clock again.
Why does my Yamaha TSX-120 have no sound?
If your Yamaha Stereo System speakers aren't producing any sound, check the following: * Ensure the volume isn't set to the minimum level. * Make sure the mute function is not activated. * Verify that you've selected the correct source. * Confirm that the disc you're using is compatible with the unit.
Why does my Yamaha TSX-120 Stereo System turn on and then off?
If your Yamaha Stereo System turns on but immediately shuts off, it might be due to a loose power cable. Ensure the power cable is firmly plugged into the wall outlet. Alternatively, the unit may have experienced a strong electrical shock. In this case, turn off the system, disconnect the power cable, wait about 30 seconds, then reconnect the power cable and turn the system back on.
General| Type | Stereo System |
|---|---|
| Brand | Yamaha |
| Model | TSX-120 |
| Bluetooth | Yes |
| CD Player | Yes |
| FM Tuner | Yes |
| Alarm | Yes |
| Supported Audio Formats | MP3, WMA |
| USB Port | Yes |
| Speaker Type | Full Range |
| Playable Media | CD, USB |
To Next Page
