Why does my Yamaha Stereo System delay playback?
If playback doesn't start immediately after pressing play on your Yamaha Stereo System, the disc may be dirty; try wiping it clean. The disc may also be incompatible. If the unit was moved from a cold to a warm place, condensation may have formed on the disc reading lens; wait an hour or two for the unit to adjust to room temperature and try again.
What does 'USB Over Current' mean on Yamaha TSX-120?
If your Yamaha Stereo System displays “USB Over Current,” an incompatible USB device is likely connected. Turn off the system and reconnect the USB device. If the message reappears, the USB device is not compatible with the unit.
Why won't my Yamaha Stereo System play MP3 files from USB?
If your MP3/WMA file in the USB device does not play on the Yamaha Stereo System, the USB device might not be recognized. Turn the system off and on again. If that doesn't work, disconnect the device while the system is off, then reconnect it and turn the system on. Also, connect an AC adapter if one came with the device. As a last resort, try another USB device.
What to do if Yamaha TSX-120 remote control is not working?
If your Yamaha Stereo System's remote control isn't working correctly, there might be several reasons: * You may be operating the remote outside of its intended range. * The remote control sensor on the unit could be exposed to direct sunlight or certain types of lighting. Try adjusting the lighting or the unit's orientation. * The battery might be low. Replace it with a new one. * There might be obstructions between the remote and the unit's sensor. Remove any obstacles.
What to do if Yamaha Stereo System initial DAB scan is not working?
If the initial scan operations are unsuccessful on your Yamaha Stereo System and “Not found” appears on the display, the DAB signals might be too weak. Try changing the height, direction, or placement of the indoor DAB/FM antenna.
How to improve DAB radio reception on Yamaha TSX-120?
If the DAB station reception on your Yamaha Stereo System is weak, the positioning of the indoor DAB/FM antenna and/or the unit might not be optimal for DAB reception. Use the TUNE AID feature to locate the best position for optimal DAB reception. The DAB signals may also be too weak, so try changing the antenna's height, direction, or placement.
Why is DAB station information missing on my Yamaha TSX-120?
If the DAB station information does not appear or is inaccurate on your Yamaha Stereo System, the DAB station may be temporarily out of service, or the DAB station information is not provided by the DAB broadcaster. Contact the DAB broadcaster.
Why is preset selecting function not working on my Yamaha Stereo System?
If the preset selecting function does not work on your Yamaha Stereo System, the preset (memory) may have been erased. Preset radio stations again.
How to reduce noise during stereo broadcast on Yamaha Stereo System?
If you are experiencing too much noise during stereo broadcast on your Yamaha Stereo System, the radio station you selected may be far from your area, or the radio wave reception may be weak in your area. Try manual tuning to improve the signal quality.
Why does my Yamaha Stereo System turn on and then immediately shut off?
If your Yamaha Stereo System turns on but immediately shuts off, it might be due to a loose power cable. Ensure the power cable is firmly plugged into the wall outlet. Alternatively, the unit may have experienced a strong electrical shock. In this case, turn the system off, disconnect the power cable, wait about 30 seconds, reconnect it, and then turn the system back on.
General| Type | Stereo System |
|---|---|
| Brand | Yamaha |
| Model | TSX-120 |
| Bluetooth | Yes |
| CD Player | Yes |
| FM Tuner | Yes |
| Alarm | Yes |
| Supported Audio Formats | MP3, WMA |
| USB Port | Yes |
| Speaker Type | Full Range |
| Playable Media | CD, USB |
To Next Page
