Why won't my Yamaha Stereo System play MP3 files from USB?
If your MP3/WMA file in the USB device does not play on the Yamaha Stereo System, the USB device might not be recognized. Turn the system off and on again. If that doesn't work, disconnect the device while the system is off, then reconnect it and turn the system on. Also, connect an AC adapter if one came with the device. As a last resort, try another USB device.
What does 'USB Over Current' mean on Yamaha TSX-120?
If your Yamaha Stereo System displays “USB Over Current,” an incompatible USB device is likely connected. Turn off the system and reconnect the USB device. If the message reappears, the USB device is not compatible with the unit.
Why does my Yamaha Stereo System delay playback?
If playback doesn't start immediately after pressing play on your Yamaha Stereo System, the disc may be dirty; try wiping it clean. The disc may also be incompatible. If the unit was moved from a cold to a warm place, condensation may have formed on the disc reading lens; wait an hour or two for the unit to adjust to room temperature and try again.
Why some buttons on my Yamaha Stereo System don't work?
If some button operations on your Yamaha Stereo System aren't working, the disc you've loaded might be incompatible. Remove the disc and check if the unit supports it.
Why isn't my iPod charging on my Yamaha Stereo System?
If your iPod isn't charging when docked in your Yamaha Stereo System, it might not be properly set in the iPod dock. Remove the iPod and then re-dock it.
What does iPod Connect Error mean on my Yamaha TSX-120 Stereo System?
If your Yamaha Stereo System displays “iPod Connect Error”, there may be a communication problem between the unit and your iPod. Turn off the system and then reconnect your iPod to the unit.
How to reset clock on Yamaha TSX-120 Stereo System?
If your Yamaha Stereo System's clock setting has been cleared, it's likely because the unit was left unplugged for more than a week. Plug the power cable firmly back into the wall outlet and set the clock again.
Why does my Yamaha TSX-120 have no sound?
If your Yamaha Stereo System speakers aren't producing any sound, check the following: * Ensure the volume isn't set to the minimum level. * Make sure the mute function is not activated. * Verify that you've selected the correct source. * Confirm that the disc you're using is compatible with the unit.
Why does my Yamaha TSX-120 Stereo System turn on and then off?
If your Yamaha Stereo System turns on but immediately shuts off, it might be due to a loose power cable. Ensure the power cable is firmly plugged into the wall outlet. Alternatively, the unit may have experienced a strong electrical shock. In this case, turn off the system, disconnect the power cable, wait about 30 seconds, then reconnect the power cable and turn the system back on.
What does 'No Disc' mean on my Yamaha TSX-120 Stereo System?
If your Yamaha Stereo System displays “No Disc” even with a disc in the tray, the disc might be incompatible. Ensure you are using a supported disc. The disc could also be dirty, so try cleaning it. Lastly, check that the disc is loaded correctly with the labeled side facing up.
General| Type | Stereo System |
|---|---|
| Brand | Yamaha |
| Model | TSX-120 |
| Bluetooth | Yes |
| CD Player | Yes |
| FM Tuner | Yes |
| Alarm | Yes |
| Supported Audio Formats | MP3, WMA |
| USB Port | Yes |
| Speaker Type | Full Range |
| Playable Media | CD, USB |
To Next Page
