1. Rubber cap
EC000015
cC
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
3. Securely install the rubber caps.
ECA00034
cC
Be sure to install the rubber caps
to prevent dust, etc. from entering
the fork legs.
NOTE:
Although the total number of clicks of
a damping force adjusting mecha-
nism may not exactly match the
above specifications due to small dif-
ferences in production, the actual
number of clicks always represents
the entire adjusting range. To obtain
a precise adjustment, it would be
advisable to check the number of
clicks of each damping force adjust-
ing mechanism and to modify the
specifications as necessary.
2. To increase the damping force
and thereby harden the damping,
turn the adjusting screw on each
fork leg in direction a. To
decrease the damping force and
thereby soften the damping, turn
the adjusting screw on each fork
leg in direction b.
Minimum (soft) 20 clicks in direction b*
Standard 11 clicks in direction b*
Maximum (hard) 1 click in direction b*
* With the adjusting screw fully turned in direction a
To Next Page
Loading...
