8-1
EAU01038
SPECIFICATIONS
8
Specifications
Model TTR250R(C)
Dimensions
Overall length 2,095 mm (82.5 in)
Overall width 835 mm (32.9 in)
Overall height 1,260 mm (49.6 in)
Seat height 915 mm (36 in)
Wheel base 1,405 mm (55.3 in)
Ground clearance 305 mm (12 in)
Minimum turning radius 2,200 mm (86.6 in)
Basic weight (with oil and full
fuel tank) 124 kg (273 lb)
Engine
Engine type Air-cooled 4-stroke, DOHC
Cylinder arrangement Forward - inclined
single cylinder
Displacement 249 cm
3
Bore × Stroke 73.0 × 59.6 mm (2.87 × 2.35 in)
Compression ratio 10.2:1
Starting system Electric starter
Lubrication system Wet sump
Engine oil
Type
Recommended engine oil
classification: API Service SE, SF, SG type
or higher
cC
In order to prevent clutch slippage (since the engine oil also
lubricates the clutch), do not mix any chemical additives. Do
not use oils with a diesel specification of “CD” or oils of a
higher quality than specified. In addition, do not use oils
labeled “ENERGY CONSERVING II” or higher.
Quantity
Without oil filter element
replacement 1.1 L (0.97 Imp qt, 1.16 US qt)
With oil filter element
replacement 1.2 L (1.06 Imp qt, 1.27 US qt)
Total amount (dry engine) 1.45 L (1.28 Imp qt, 1.53 US qt)
To Next Page
Loading...
Need help?
General
