5-3
OPERATION AND IMPORTANT RIDING POINTS
5
EAU01258
Starting a warm engine
Follow the same procedure as for
starting a cold engine with the excep-
tion that the starter (choke) is not
required when the engine is warm.
EC000048
cC
8 Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the machine for long dis-
tances. The transmission is
properly lubricated only when
the engine is running.
Inadequate lubrication may
damage the transmission.
8 Always use the clutch while
changing gears to avoid dam-
aging the engine, transmis-
sion, and drive train, which are
not designed to withstand the
shock of forced shifting.
EAU00423
Shifting
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing
hills, etc.
The gear positions are shown in the
illustration.
NOTE:
To shift the transmission into the neu-
tral position, press the shift pedal
down repeatedly until it reaches the
end of its travel, and then slightly
raise it.
To Next Page
Loading...
