Yamaha TT-R - Page 33

3-13
INSTRUMENT AND CONTROL FUNCTIONS
3
With the engine turned off:
1. Make sure that the engine stop switch is set to “
#”.
2. Turn the key to “ON”.
3. Shift the transmission into the neutral position.
4. Push the start switch.
Does the engine start?
The neutral switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
5. Turn the engine off.
6. Shift the transmission into gear.
7. Keep the clutch lever pulled.
8. Push the start switch.
Does the engine start?
The clutch switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
NO
NOTE:
This check is most reliable if performed with
a warmed-up engine.
YES
The system is OK. The motorcycle can be ridden.
YES
NO
5GF-9-14 (USA) 4/23/02 2:10 PM Page 31