Yamaha TT-R - Page 35

4-2
PRE-OPERATION CHECKS
4
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-14
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-25
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-23–6-25
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-15–6-18
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-26
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-26
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-27
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
3-1–3-2, 6-31–6-33
Engine stop switch • Check operation. 3-2
ITEM CHECKS PAGE
5GF-9-14 (USA) 4/23/02 2:10 PM Page 33