8-26
8
4. If the coolant is at or below the minimum
level mark, remove the coolant reservoir
cap and add coolant to the maximum lev-
el mark.
5. Install the reservoir cap.
To change the coolant
1. Park the vehicle on a level surface.
2. Remove the hood. (See page 8-10.)
3. When the engine is cool, remove the radi-
ator cap. WARNING! Never attempt to
remove the radiator cap when the en-
gine is hot.
[EWB04250]
4. Place a container under the engine to col-
lect the used coolant.
5. Remove the coolant drain bolt. Discard
the used gasket.
1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
1. Radiator cap
1
UB3D7AE0.book Page 26 Tuesday, November 7, 2017 9:38 AM
To Next Page
Loading...
Need help?
General
