8-27
8
6. Remove the coolant reservoir cap. 7. Place a container under the coolant res-
ervoir.
8. Disconnect the coolant reservoir hose
and drain the reservoir.
9. After draining both the radiator and the
reservoir, thoroughly flush the cooling
system with clean tap water.
10. Install the coolant drain bolt with a new
gasket, and then tighten to the specified
torque.
1. Coolant drain bolt
2. Gasket
1. Coolant reservoir cap
2. Coolant reservoir hose
UB3D7AE0.book Page 27 Tuesday, November 7, 2017 9:38 AM