Yamaha XMAX - Page 49

*OTUSVNFOUBOEDPOUSPMGVODUJPOT
5-21

4. Remove the bolts, and then install
the bolts in the desired position.
5. Install the windshield to the high
position by installing the bolts, and
then tighten the bolts to the spec-
ied torque. 8"3/*/( " MPPTF
XJOETIJFMEDPVMEDBVTFBOBDDJ
EFOU #F TVSF UP UJHIUFO UIF
TDSFXTUP UIFTQFDJãFEUPSRVF
[EWA15511]
6. Place the bolt access covers, and
then install the quick fasteners.
5PDIBOHF UIFXJOETIJFMEIFJHIUUP
UIFMPXQPTJUJPO
2. Remove the bolt access covers by
removing the quick fasteners.
3. Remove the windshield by remov-
ing the bolts.
1. Bolt
1. Bolt
1. Bolt
1
1
1
1
1
1
1. Bolt
5JHIUFOJOHUPSRVF
Windshield bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
1. Bolt access cover
1
1
1
6. Place number plate bracket with
bolt and collar.
1. Remove number plate bracket with
bolt and collar.