Yamato FP102 - Page 47

44
4. Operating procedure
Resetting integrated CO2 volume and CO2 emission factor
3
KG.K：(CO2) discharge coefficient
Quoted from the substitutive values, factory setting of
550 （ 0.000550t-CO2/kWh ） , the Environmental
Ministry Press Release on 6 November 20013.
Confirm the discharge coefficient of different utility
companies with each company.
Pressing the key will result in:
550（lit）→0550（flash）
Press the keys to change a discharge
coefficient.
key is used to determine
key is used to return
CO2:RT：Integrated CO2 Emission
Press key, and then change from
OFF
(illuminate) to →
RUN
(flash) on Top Screen.
key is used to reset Integrated CO2 Emission.
key is used to return
④ Pressing the key longer will return to the time
display screen.