4. Disassembly and Reassembly
70
No. Name of tool Use Illustration
9 V Block Measures shaft distortion.
10 Torque wrench Used to tighten bolts and nuts to
standard torque.
11 Thickness gauge Measures the distance between the
ring and ring groove, and between
the shaft and shaft joint at time of
assembling.
12 Cap tester Check for leakage in the fresh water
system.
13 Battery current tester Checks density of antifreeze and
charging condition of battery fluid.
14 Nozzle tester Checks the shape and pressure of
spray emitted from the fuel injection
valve at the time of injection.
15 Digital thermostat Measures temperature of various
parts.
abcdefghijklmn
abcdefghijklmn
abcdefghijklmn
abcdefghijklmn
abcdefghijklmn
abcdefghijklmn
abcd efghijk
Float
To Next Page
Loading...
