Chapter 3 Fuel Injection Equipment
3. Disassembly, Reassembly and Inspection of Fuel Injection Pump
4LHA Series
(12) Mount double nuts or a coupling on the end of the
camshaft, and pull out the roller guide support pin
as
you
turn
the camshaft.
(13)
Make
sure
that
the roller guide stop groove is in the
correct position, and
tighten
the roller guide stop
bolts.
tightening torque
5.9-6.9 (0.6-0.7)
N(kgf)-m
3-2-30
To Next Page
Loading...
