Yanmar 4LHA-HTP - Introduction £ Index • •; Table of Contents

INTRODUCTION £
INDEX • • "
1. FOR SAFE OPERATION
4
~8
1.1 Warning Symbols 4
1.2 Safety Precautions 5-6
1.3 Location of product safety Labels ""
7
~
8
2. EXPLANATION OF PRODUCT 9~22
2.1 Use, Driving System etc. • • 9
2.2 Engine Specificitions • *10-12
2.3 Names of Parts • - • 13-15
2.4 Major Servicing Parts • •*16
2.5 Controi Equipment • 17-22
2.5.1 Control panel •17-21
2.5.2 Remote Control Handle 21-22
3. BEFORE OPERATION
3.1 Fuel Oil, Lube Oil & Cooling Water 23-25
3.1.1 Fuel oil •23
3.1.2 Lube oil • •'•24
3.1.3 Cooling Water • 24-25
3.2 Supplying Fuel • • • ••••••26-27
3.2.1 Filling the Fuel Tank —— 26
3.2.2 Bleeding the Fuel System •26-27
3.3 Supplying Engine lube oil 27
3.4 Supplying Marine Drive oil ••• • •
28
3.5 Supplying Cooling Water - 29-30
o e o 1,:— 30
o.vs wiciiicxiiiy
3.7 Checking the Lube Oil and Cooling Water ••31
4. HOW TO OPERATE 32-^
4.1 Inspection Before Starting Z2^m
4.2 Checking the Control Panel and Alarm Devices • •
34
4.3 Starting • ;34-35
4.3.1 Daily Starting 34
4.3.2 Starting Under Low Temperature Conditions •
34
4.3.3 Restarting After Starting Failure ""
35
4.3.4 After the Engine has Started -
35
4.4 Adjusting the Engine Speed •
36
4.5 Clutch Operation for the Marine Drive
:
••••36
4.5.1 Forward, Neutral, Reverse •
36
4.6 Check During Operation ; •"
37
4.7 Stopping the Engine
38
4.8 Operation Procedure •
39
4.9 Long-Term Storage • 40-41
4.9.1 Before storing for long periods of time •40^i
4.9.2 Checking the Engine for fteuse After a Long Storage Period •
-2-