8-18
8. OPERATE THE TRACTOR
Lx410/450/490 Operator's Manual
1. Before approaching a slope, select a lower gear
setting.
(A) Range gear lever
(a) Shift to a lower speed
2. Always travel slowly on a slope.
3. Drive the tractor according to the type of a slope,
as indicated below.
■ Uphill and Downhill Slopes
● Start slowly.
● Make sure the range gear is in a slow gear.
● Run the engine at a lower speed.
■ Steep Downhill Slope
● Move the range gear lever to the lower speed
position before going a downhill slope.
• the preceding action sets the level of engine
brake
● Select the range gear lever position suitable for
the steepness of a slope.
● Avoid parking the tractor perpendicular to a
slope
• if parking on a slope is unavoidable, chock
all the tires safely and securely and engage
the parking brake securely, for details, see
"6. Lock and Set the Parking Brake" on page
7-4
● On a slope, the tractor is unstable and more
prone to severe injury or even death. Always
be alert.
● Avoid traveling backward, up and down on a
slope to prevent tipping over.
● Keep away from ditch or deep mud to avoid
the risk of the tractor tipping over.
● Always drive slowly on any slope. Avoid
under any circumstances sudden change of
speeds or directions.
● For increased stability of the tractor on slope:
• always use tires with the widest possible tire
tread width
• follow the instructions for proper weighting
• for details, see "Chapter 12. TIRES, WHEELS
AND WEIGHTS" on page 12-1
Avoid injury!
● When backing up a slope, keep the tractor
parallel with the inclination of the slope.
To Next Page
Loading...
Need help?
General
