This document is an instruction manual for the Yardworks 13" (33 cm) Cordless Grass Trimmer, model number 060-1983-0. It provides comprehensive information on the device's function, technical specifications, usage, and maintenance.
Function Description:
The Yardworks 13" (33 cm) Cordless Grass Trimmer is designed for cutting grass and weeds in various outdoor settings, including under bushes, on slopes, and along edges that a lawn mower cannot reach. It is a battery-operated gardening appliance, emphasizing portability and ease of use without the constraints of a power cord. The trimmer features an automatic bump line feed system, allowing the operator to release more cutting line without stopping the motor by lightly tapping the bump knob on the ground.
Important Technical Specifications:
- Model Number: 060-1983-0
- Voltage: 48 V
- No Load Speed: 7000/min
- Cutting Diameter: 13" (33 cm)
- Line Diameter: 0.080" (2.0 mm)
- Line Length: 2x8ft (4.9 m)
- Battery Capacity (060-1987-2): 2.0 Ah (Included)
- Suitable Battery Packs: 060-1987-2 (2.0 Ah, Included), ABP4830SH (3.0 Ah, Not included), 060-1988-0 (4.0 Ah, Not included), ABP4850SH (5.0 Ah, Not included), 060-1989-8 (6.0 Ah, Not included)
- Charger Input (060-1990-2): 120 V~, 60 Hz, 110 W
- Charger Output (060-1990-2): 48 V, 2 A
- Suitable Chargers: 060-1990-2 (Included), 060-1992-8 (120 V~, 60 Hz, 320 W; 48 V, 6 A; Not included)
- Charging Time: 1 hr (for 2.0 Ah battery with 060-1990-2 charger)
- Machine Weight: 11 lb (5 kg)
- Safety Certifications: ETL Listed, Intertek 3026035, Canadian ICES-001 compliant, FCC Part 15 compliant.
Usage Features:
- Assembly: The manual details the assembly process, including connecting the upper and lower shafts, attaching the auxiliary handle, and securing the safety guard. It emphasizes that the machine should not be operated before complete assembly and without the battery inserted.
- Battery Charging: The battery pack is not charged at the time of purchase and must be fully charged before first use. The charging procedure involves plugging the charger into an outlet and sliding the battery pack into the charger. An indicator light flashes green during charging and turns solid green when fully charged. The manual also provides troubleshooting for charging issues, such as defective batteries or temperature protection.
- Battery Installation and Removal: The battery pack slides into the tool's battery port with a simple push and is removed by pressing the battery pack latch.
- Switching On/Off: To switch on, the lock-off button must be pressed first, followed by the On/Off switch. Releasing the On/Off switch turns the trimmer off.
- Trimming Operation:
- Maintain the trimmer head at an angle of approximately 30° to the ground.
- Avoid cutting wet grass to prevent sticking and slipping.
- Regularly remove clippings and dirt from the trimmer head.
- Work rhythmically, cutting from right to left to throw trimmings away from the work area.
- For longer/high grass, cut in 2 to 3 stages.
- Avoid moving the trimmer too fast to ensure effective cutting and prevent damage.
- Safety Warning: Always wear eye protection. Do not lean over the trimmer head. Ensure the line is fed out and the motor is at full speed before trimming.
- Automatic Bump Line Feed: The trimmer head allows for continuous operation while releasing more cutting line. When the line becomes frayed or worn, lightly tap the bump knob on the ground to release additional line.
- Spool and Line Replacement: Instructions are provided for replacing the entire spool with line or manually replacing the line on the spool. This involves pressing cap release latches, rotating the cap counter-clockwise, removing the old spool, placing the new spool, and tightening the cap clockwise. The manual specifies cutting line with a maximum diameter of 0.08” (2 mm).
- Safety Symbols: The manual includes various safety symbols, such as "Read instruction manual," "Wear ear protection," "Thrown objects away from operator," "Li-ion battery; battery must be recycled," "Do not burn," "Warning," "Remove battery prior to changing accessories," "Trimming," "Edging," "Lock," and "Unlock."
Maintenance Features:
- General Maintenance: Always check the product for damage before and after use. Disconnect the battery from the tool for checks. The power tool requires no additional lubrication or maintenance, and there are no user-serviceable parts.
- Cleaning: Never use water or chemical cleaners. Wipe clean with a dry cloth. Keep motor ventilation slots clean and all working controls free of dust.
- Storage: Store the power tool in a dry, room-temperature location, out of reach of children. The recommended ambient temperature range for tool and battery use and storage is 0 to 45°C (32 to 113°F). For charging, the recommended range is 0 to 40°C (32 to 104°F). It is recommended to store the battery indoors during winter months.
- Battery Storage: To prevent damage, charge the battery to full or at least half charge before storage. If the tool is not used for long periods, charge the battery every 3-6 months.
- Troubleshooting: A table is provided to address common problems such as the trimmer failing to operate, running intermittently, excessive vibrations/noise, short cutting time, or not cutting. It offers possible causes and corrective actions, including recharging the battery, allowing it to cool/warm, rewinding the line, removing grass, or contacting customer service.
- Warranty: The product comes with a five-year limited warranty for the tool (excluding battery) and a three-year limited warranty for the battery, covering defects in material or workmanship. Normal wear parts (blade adaptors, blades, grass bags, and tires) have a one-year warranty. The warranty does not cover misuse, commercial use, abuse, neglect, accidents, improper maintenance, or alterations. Service can be obtained by calling 1.866.523.5218. Transportation charges for service are the responsibility of the purchaser.
Need help?
To Next Page
General