Start-Up
Programming &
Operation
This chapter explains the functions of the LED operator and how
to program the drive for initial operation.
4.1 SECTION SAFETY.............................................76
4.2 USING THE DIGITAL LED OPERATOR..............79
4.3 THE DRIVE AND PROGRAMMING MODES.......85
4.4 START-UP FLOWCHART
..................................93
4.5 BASIC OPERATION..........................................94
4.6 POWERING UP THE DRIVE.............................119
4.7 NO-LOAD OPERATION TEST RUN..................121
4.8 TEST RUN WITH LOAD CONNECTED.............123
4.9 VERIFYING AND BACKING UP PARAMETER
SETTINGS.......................................................124
4.10 TEST RUN CHECKLIST...................................126
4
YASKAWA ELECTRIC TOEP C710606 25D YASKAWA AC Drive J1000
Installation & Start-Up Manual
75
To Next Page
Loading...
