5 Conditions
YASKAWA TOEP C710617 0SB YASKAWA AC Drive GA500 Installation Manual 19
Drive Model Screw Size
Tightening Torque
N∙m (lbf∙in)
4001 - 4012 M5
2.0 - 2.5
(17.7 - 22.1)
4018 - 4038 M5
2.0 - 2.5
(17.7 - 22.1)
NOTICE
Damage to Equipment. Tighten the screws to the specified tightening torque.
Incorrect tightening torque can cause too much heat and damage to the drive.
◆ Install the Drive
Apply the thermal compound across the full surface of the application area on the
heatsink. Tightly push the drive against the metal surface (enclosure panel).
Clean off the unwanted thermal compound from around the drive perimeter.
A - Metal surface (enclosure panel)
B - Heatsink plate
C - Screws
D - Finless-type drive
E - Drive mounting area
Figure 5.4 Install the Drive
To Next Page
Loading...
