Maintenance
4
4.1 Replace Cooling Fans and Circulation Fans
YASKAWA TOEPC71061779E GA800 DRIVE INSTALLATION MANUAL
43
■ Fan Installation
Reverse the removal procedure for fan installation.
1. Connect the relay connector between the drive and cooling fan.
Figure 4.3 Connect the Relay Connector
2. Align the notch on the fan with the pin on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pin on drive
C - Front of drive
Figure 4.4 Install the Cooling Fan
3. Put the cable and connector in the recess of the drive.
A - Front of drive B - Space for cable
*1
Figure 4.5 Put the Cable and Connector in the Drive Recess
*1 Make sure that the cable and connector are in the correct space.
To Next Page
Loading...
