4.1 Replace Cooling Fans and Circulation Fans
54
YASKAWA TOEPC71061779E GA800 DRIVE INSTALLATION MANUAL
3. Put the cables and connectors in the recess of the drive.
A - Front of drive B - Space for cables
*1
Figure 4.30 Put the Cables and Connectors in the Drive Recess
*1 Make sure that the cables and connectors are in the correct space.
4. Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the holes on the
drive.
A - Front of drive
B - Drive holes
C - Connector tabs
Figure 4.31 Reattach the Fan Finger Guard
5. Push the hooks on the left and right sides of the fan finger guard and click it into place on the drive.
Figure 4.32 Reattach the Fan Finger Guard
6. Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the fan operation time.
To Next Page
Loading...
