Maintenance
4
4.1 Replace Cooling Fans and Circulation Fans
YASKAWA TOEPC71061779E GA800 DRIVE INSTALLATION MANUAL
57
3. Put the cables and connectors in the recess of the drive.
A - Front of drive B - Space for cables
*1
Figure 4.37 Put the Cables and Connectors in the Drive Recess
*1 Make sure that the cables and connectors are in the correct space.
4. Hold the fan finger guards at an angle and put the connector tabs on the fan finger guards into the holes on
the drive.
Note:
When you install the cooling fans, make sure that you do not pinch cables between the fan finger guards and the drive.
A - Front of drive
B - Insertion area
C - Connector tab
Figure 4.38 Reattach the Fan Finger Guards
To Next Page
Loading...
