(Cont'd)
Command Function/Contents
BT. All boundary tables for zone signals are sent from the Servopack
by this command.
(Example) Command f BTO1--+n... n
.... l BTO2--+n'"n
(Sent from Servopack)
BTpp •Boundary No. pp boundary position is sent from the Servopack.
(pp: Boundary No. (Example)
pp=l to 31) Command _ _ BT25 -- +00050000
(Sent from Servopack)
BTpp = -n ....n. A commandto changeboundaryNo. pp boundarypositionto (+n...n).
(Max. 8 digits) ÷ can be omitted.
) |[±n"fPP:Boundary No.]:Boundaryposition Becomes effective by execution of [R_ commandor ON/OFFofcontrOlpower(Example)SUpply.
_pp = I to 31 - * [BT25--50050 [
Command.
• Boundary position unit is [reference unit] .
,o For boundary position, write in the data so as to be
BTOI£BTO2_BT03£.. _BT31
Example
: When onlyBTOI to BTIO used,set follows:
are
as
|BTn=+99999999|
[BT31= + 99999999 ]
Note: Data cannot be changed frequently because of characteristics of
E2PROM.
)
-- 139 --
To Next Page
Loading...
