(5) S series Dimensions in mm (inches)
Drawing 1 USASEM-02A_--i 2 I
223.5
LL_ _, LR |
" IV
Notes:
I. _.."..in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/RJ
Semi-standard : W (1024 P/R)
2. Vibration class : V15
3. Plug and clamp are not attached for receptacle connection. ,_
4. Motor should be mounted with connectors down.
1
Drawing 2 USASEM-03A_--j2, -05Ai.-:i2 (Straight Shaft)
105512 _1
• 25i
10 98_
Notes :
I. Plug and clamD are not attached for receptacle connection.
2. Motor should be mounted with connectors down.
3. t,-,.,in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (1024 P/R)
Drawing 3 USASEM-08Ai:;j1, -15Ai;.j1, -30Ai--jl (Taper Shaft) I
= " L
(UTMAH.B
': _O.A
I i
\ li
TAPEF_1.1_0 4 LZ DIA
251 i (098) KB _
Notes :
1. Plug and clamp are not attached/or receptacle connection.
.2 Key and keyway comply with JIS B 1301-1976
(Parallel key, keyway .'precise class.)
3l Motor should be mounted with connectors down.
4. _,_"-.in the models are as follows according to types of the encoder (P/R).
I
Standard : S (8192 P/R)
Semi.standard : W (1024 P/R}
-- 258 --
To Next Page
Loading...
