(2) F Series Dimensions in mm (inches)
Drawing1 USAFED-02fj-J-jjl,-03fjjj_jjjl (TaperShaft)
L
I. _ LR
LR _ ,
LT LM 10551 14 , 15 1059'1 , 8 1103'5)
OPTICAL LE 0210)
ENCOOER MOTOR LG LE LC _ 10 65 (0.226)
I..J KB1 MTG.HOLES
I_ KB2
Notes : Detail of Shaft Extension
I. Plug and clamp are not attached for receptacle connection.
2. Key and keyway comply with JIS B 1301-1976
(Parallel key, keyway : common class.)
3. Motor should be mounted with Connectors down.
4. _.._in the models are as follows according to types of the encoder (P/R).
Standard : 2 18192 P/R)
Semi-standard : 3 (2048 P/R)
Drawing2 USAFED-05_fjjrjjjl,-09fjfjfjjjl (TaperShaft),-13Cfjjj2 (StraightShaft)
18(07_) 1210472]
6 [0236)
1410551] 103 {0406)
,LT
6 (0236) 4(01
ER1/10
Notes : For -05C21, -09C21 For -13C22
1. Plug and clamp are not attached for receptacle connection. Detail of Shaft Extension
2. Key and keyway comply with JIS B 1301-1976
(Parallel key, keyway : common class.)
3, Motor should be mounted with connectors down.
4. L"_.in the models are as follows according to types of the encoder (P/R).
Standard : 2 18192 P/R)
Semi-standard : 3 (2048 P/R)
Drawing 3 USAFED-20C!::]2 to -44Cf:-i2 (Straight Shaft)
kM
2-M8 SCREWS (FOR EYEBOLT)
OPTICALENCOOER_S_ _''___/ '_ _'_MOTOR _ 4._L_ " --'__=,_ t
[ KB1
KS2 Detail of Shaft Extension
Notes ;
1. Plug and clamp are not attached for receptacle connection.
2. Motor should be mounted with connectors down.
3. _._-'.,in the mode{s are as to_/ows according to types o/ the encoder (P/R).
Standard : 2 (8192 P/R)
Semi-standard : 3 (2048 P/R)
- 268 --
To Next Page
Loading...
