(3) G Series Dimensions in mm (inches)
Drawing 1 USAGED-02_;-jf;:jl, -03i-:Ji--il (Taper Shaft)
L
LLLL L
- - (0551) 2 4_,15(05911 I 81(o3,5)
55
LE 10216)10 6.5 0226
MOTOR LG LE LC _
\_8(o,,) _ p,o _ ,(o,sTsi_
' o.i!
. J
Notes : Detail of Shaft Extension
I. Plug and clamp are not attached tor receptacle connection.
2. Key and keyway comply with JIS B 1301-1978.
(Parallel key. keyway : common class.)
3. Motor Should be mounted with connectors down.
4. _...'in the models are as follows according tO types of the encoder (P/R).
Standard : 2 (8192 P/R)
Semi-standard : 3 (2048 P/R)
Drawing 2 USAGED-05_::ji::jl, -09i::ji::jl (Taper Shaft), -1 3Ai:-j2 (Straight Shaft)
OPTICALENCODER MOTO_ I)ZDIA_ _i/_
For -05A21, -09A21 For -13A22
Notes : Detail of Shaft Extension
1. Plug and clamp are not attached for receptacle connection.
2. Key and keyway comply with JIS B 1301-1978.
(Parallel key. keyway : common class.)
3. Motor should be mounted with connectors down.
4. _.".,in the models are as follows according to types of the encoder (P/R).
Standard : 2 (8192 P/R)
Semi-standard : 3 (2048 P/R)
Drawing 3 USAGED-20A_--j2 to -44Ai.-jj2 (Straight Shaft)
1
LL LR
LT kM
L K_m
_B2 Detail of Shaft Extension
Notes :
1. Plug and clamp are not attached for receptacle connection.
2. Motor should be mounted with connectors down.
3. _._3in the models are as follows according to types of the encoder (P/R).
Standard : 2 (8192 P/R)
Semi-standard : 3 (2048 P/R)
- 270 -
To Next Page
Loading...
