(5) S Series Dimensions in mm (inches)
Drawing 1 USASEM-02A!-:i2, -03A!_:_2, -05A_-;j2 (Straight Shaft)
i LT _, LL LLM-- -i
_LR." J
19. .7_ , KB_ .
Notes :
1. Type USASEM-O2A32terminates in bare wires with a waterproof gland (seal] fitting.
Therefore, the MS-connector part differs from the figure above.
For details, contact your YASKAWArepresentative.
2. Plug and clamp are not attached for receptacle connection.
3. Motor should be mounted with connectors down.
4. f_-'_,in the models are as follows according to types of the encoder (P/R).
Standard : 3 (2048 P/R)
Semi-standard : 4 (2500 P/R)
Drawing 2 USASEM-08A!:-I1, -15A[;_-i1, -30A!;;11 (Taper Shaft)
L
- KB1 _ _- '_--
x'_ SECT.a-a
_ ; /10
4 LZ DIA
• For only -15A31.
2O (0.79
Detail of Shaft Extension
Notes :
1. Hexagon socket head bolts should be used to mount the motor.
2 Plug and clamp are not attached for receptacle connection.
3. Key and keyway comply with JIS B 1301-1976.
[Parallel key: precise class.,)
4. Motor should be mounted with connectors down.
5. f_"_,in the models are as follows according to types of the encoder [P/R].
Standard : 3 (2048 P/R)
Semi-standard : 4 (2500 P/R)
-- 274 --
To Next Page
Loading...
