YASKAWA JVOP-KPLCA04A Series - Methods to Install a Remote Keypad

5 Installation Procedure
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 17
2. Put the bottom of the keypad into position first, then
carefully push on the top of the keypad until the hook
clicks into place.
Figure 5.2 Attach the Keypad
◆ Methods to Install a Remote Keypad
Installation Method Description Required Tools
External/Face-Mount
Installs the option on the
outside of the panel. An
optional installation bracket
is not necessary for this
installation.
Phillips screwdriver #2 (M3)
Internal/Flush-Mount
Encloses the keypad in the
panel. The front of the
keypad is flush with the
outside of the panel.
• Phillips screwdriver #2
(M3, M4)
• Installation support set A
(for mounting with
screws, model: 900-192-
933-001)
• Phillips screwdriver #2
(M3)
• Wrench (M4)
• Installation support set B
(for mounting with nut
clamp, model: 900-192-
933-002)