5 Installation Procedure
16 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
5 Installation Procedure
◆ Section Safety
NOTICE
Damage to Equipment. Correctly connect all pins and
connectors. If the pins and connectors are incorrect, it can cause damage to
equipment and incorrect operation.
NOTICE
Damage to Equipment. Do not bend the communication
cables more than the bend radius specifications. If you bend the cables too
much, it can break the wires and loosen connections.
Note:
Use Yaskawa connection cables or recommended cables only. Incorrect cables can
cause the drive or option to function incorrectly.
◆ Installing the Keypad on the Drive
1. Remove the keypad that shipped with the drive.
Figure 5.1 Remove the Keypad
To Next Page
Loading...