6 Keypad Operation
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 51
◆ Change Parameter Setting Values
This example shows how to change the setting value for C1-01
[Acceleration Time 1]. Do the steps in this procedure to set
parameters for the application.
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.
• If [Home] is not shown above the , push (Back).
2. Push (Menu).
3. Push or to select [Parameters], then push
.
To Next Page
Loading...