6 Keypad Operation
64 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
◆ Check Modified Parameters
This procedure will show all parameters that are not at their default
values. You can also use this procedure to quickly access and edit
changed parameters and is very useful when you replace a drive.
When all parameters are at their default values, the keypad will
show “0 Parameters”.
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME
screen is active.
• If [Home] is not shown on , push (Back) to show [Home]
on .
2. Push (Menu).
3. Push or to select [Modified Param / Fault Log],
then push .
To Next Page
Loading...