6 Keypad Operation
56 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
6. Push or to select a memory location, then
push .
The keypad shows “End” when the backup procedure completes
successfully.
◆ Write Backed-up Parameters to the Drive
You can back up parameters on the keypad and write them to
different drives.
Note:
• Always stop the drive before you start to restore the parameter backups.
• While you verify parameters, the drive will not accept Run commands.
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back),
and then push to show [Home].
To Next Page
Loading...