6 Keypad Operation
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 59
Note:
The keypad display changes when the settings and conditions change.
A - A1-02 [Control
Method
Selection]
settings
B - o2-04 [Drive
Model (KVA)
Selection]
settings (2 or 3
digits)
C - Presence of
DriveWorksEZ
parameter
backup
D - Parameter
backup data is
not registered
E - Backup data
does not contain
the date
Information
F - Backup date
◆ Verify Keypad Parameters and Drive Parameters
This procedure makes sure that the parameter setting values that
you backed up in the keypad agree with the parameter setting
values in the drive.
Note:
• Always stop the drive before you start to verify the parameters.
• While you restore parameters, the drive will not accept Run commands.
To Next Page
Loading...