YASKAWA JVOP-KPLCA04A Series - Use the Keypad to Operate the Drive

6 Keypad Operation
48 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
■ Show the Main Menu
Push to show the main menu. Push (HOME) to go
back to the HOME screen.
◆ Use the Keypad to Operate the Drive
This section gives information about how to use the keypad to
operate the drive.
1. Energize the drive, or push (Home) to show the
HOME screen.
If [Home] is not shown on , push (Back) to
show [Home] on .
2. Push to illuminate the LOCAL/REMOTE LED.
3. Push to show d1-01 [Reference 1], and set it to 6.00
Hz.
4. Push .
The RUN LED illuminates, and the motor runs at 6.00 Hz
in the forward direction.
5. Push to increase the frequency reference value.
6. Push .
The RUN LED will flash. When the motor stops, the LED
will go out.