YASKAWA JVOP-KPLCA04A Series - Procedure a

5 Installation Procedure
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 21
■ Procedure A
External/Face-Mount Installation
1. Use the dimensions in Table 5.2 and Figure 5.4 to cut an
opening and tap two holes in the enclosure panel.
Figure 5.4 External/Face Mount Enclosure Panel Cut-Out
Dimensions
Table 5.2 Enclosure Panel Cut-Out Dimensions mm
(in.)
W H W1 H1 H2 H3 d
22
(0.87)
78
(3.07)
22
(0.87)
29
(1.14)
22
(0.87)
1
(0.04)
3.6
(0.14)